Phone: (+33) 625 16 20 71 - Sunday to Friday
contact@alliancemedicalfrance.fr
Olympus MH-944 channel plug for endoscope reprocessing. It seals the instrument, suction and air/water channel openings and is used with the MH-946 all-channel irrigator during flushing.
The OLYMPUS MH-944 is a channel sealing cap designed for the cleaning and disinfection of EVIS EXERA II flexible endoscopes. It is used to close specific endoscope openings and help direct cleaning and disinfection solutions through the relevant internal channels.
Once fitted to the endoscope, the MH-944 seals the designated openings while allowing a controlled amount of liquid to pass through the intended ports. This design helps promote more consistent exposure of internal surfaces to the solutions used during the reprocessing procedure.
The MH-944 is designed to fit the mechanical interfaces of compatible Olympus models and can be installed without specific adjustment. Its design incorporates three separate sealing elements, intended respectively for the biopsy channel, suction channel, and air/water circuit.
This configuration covers the main openings involved in the passage of cleaning solutions during reprocessing. The accessory can be incorporated into compatible manual or automated cleaning procedures.
Before each use, a visual inspection is recommended to check for cracks, scratches, or deposits that could affect the performance of the sealing cap.
The MH-944 can be incorporated into reprocessing procedures using Olympus all-channel irrigators, depending on the configuration and applicable reprocessing protocol. Its use should follow the instructions and procedures applicable to the endoscope model and reprocessing system being used.
The OLYMPUS MH-944 is a dedicated accessory for the reprocessing of compatible endoscopes. Its multi-point sealing design helps incorporate the relevant openings into the cleaning and disinfection procedures specified for compatible equipment.
The OLYMPUS MH-944 is a channel sealing cap designed for the cleaning and disinfection of EVIS EXERA II flexible endoscopes. It is used to close specific endoscope openings and help direct cleaning and disinfection solutions through the relevant internal channels.
Once fitted to the endoscope, the MH-944 seals the designated openings while allowing a controlled amount of liquid to pass through the intended ports. This design helps promote more consistent exposure of internal surfaces to the solutions used during the reprocessing procedure.
The MH-944 is designed to fit the mechanical interfaces of compatible Olympus models and can be installed without specific adjustment. Its design incorporates three separate sealing elements, intended respectively for the biopsy channel, suction channel, and air/water circuit.
This configuration covers the main openings involved in the passage of cleaning solutions during reprocessing. The accessory can be incorporated into compatible manual or automated cleaning procedures.
Before each use, a visual inspection is recommended to check for cracks, scratches, or deposits that could affect the performance of the sealing cap.
The MH-944 can be incorporated into reprocessing procedures using Olympus all-channel irrigators, depending on the configuration and applicable reprocessing protocol. Its use should follow the instructions and procedures applicable to the endoscope model and reprocessing system being used.
The OLYMPUS MH-944 is a dedicated accessory for the reprocessing of compatible endoscopes. Its multi-point sealing design helps incorporate the relevant openings into the cleaning and disinfection procedures specified for compatible equipment.
Francais